Editor Guide

Destination Vision Plan dashboard

How to update the dashboard

A step-by-step guide for anyone updating the dashboard. You don't need to know any code: every change means editing a few words that are clearly labeled.

1. Where you edit

The page is built from three embed blocks in the CMS. You will only ever edit the middle one.

1
Hero logoThe "Destination Orlando 2035" logo at the top.
Rarely
2
ContentEvery initiative, update note, contact and section. Its first lines are a short cheat sheet.
You edit this
3
Dashboard engineMakes everything look and work right: filters, pills, progress bars, numbering, the updates panel.
Never edit

Before every edit: select all the text in the Content block, copy it, and paste it into a blank document. If anything goes wrong, you can paste it back and you're exactly where you started.

2. Five rules that prevent problems

  1. Only change the words you mean to change. Leave the pieces inside < > alone unless this guide tells you otherwise.
  2. Keep the quote marks. Settings always look like data-status="active". The value goes between the quotes.
  3. Copy whole blocks. An initiative starts at <article and ends at </article>. Always copy, move or delete both lines and everything between them.
  4. Type text normally. Apostrophes, dashes, & and accents are all fine in regular text.
  5. Preview before publishing. If you made a typo, the preview shows a yellow notice that says exactly what to fix. See examples.

3. What an initiative looks like

Every initiative is a small block like this one. The highlighted parts are the parts you edit.

One initiative
<article data-status="active" data-role="lead" data-progress="75">
  <div data-summary>Connected District</div>
  <div data-initiative>Envision a new, more connected Convention Center…</div>
  <div data-contact>Barb Bowden</div>
  <div data-update="May 30, 2026">
    The Orange County Convention Center Phase 5A…
  </div>
</article>
LineWhat it controls on the pageWhat to type
data-statusStatus pill and the Status filteractive · monitoring · standby · achieved
data-roleVisit Orlando Role pill and the Role filterlead · support · encourage
data-progressProgress bar and percentageA number from 0 to 100
data-summarySummary columnThe short name only, like Connected District
data-initiativeInitiative column (the full description)Plain text
data-contactVO Contact columnA name, or leave it empty to show a dash
data-updateLast Updated date, and the note that opens when someone clicks itDate in the quotes, note text inside

The numbers (1a, 1b, 2a…) are automatic. Don't type them. An initiative's number is its section's position plus its own position in that section: the 5th initiative in the 3rd section is always 3e. Move blocks around and every number updates by itself.

Capital letters and extra spaces don't matter in settings: "Active" works the same as "active".

4. Add an update (the most common task)

Dates come from update notes: each initiative's Last Updated date is its newest note, and the Last updated box at the top (above the search box for "search initiatives") is the newest note across all initiatives. You never type these dates anywhere else.

  1. Find the initiative by its name. If someone asks about "3e", look at the page first to see which name is 3e, then search the Content block for that name.
  2. Copy the template below and paste it just below the data-contact line.
  3. Change the date and the text.
  4. Keep the older notes. Readers can still see them under View all updates, and the order you paste them in doesn't matter: the newest date is always shown first.
Update note template
      <div data-update="June 1, 2026">
        Write the update here.
      </div>

How to write dates

Works
data-update="June 1, 2026"
data-update="Sept. 3, 2026"
data-update="6/1/2026"
data-update="TBD"
Won't work
data-update="next week"
data-update="June 2026"
data-update="1st June"

Use TBD for a note that doesn't have a date yet. The date still shows TBD, but readers can click it to read the note.

No notes at all? The dashboard shows No updates, and it can't be clicked. That's expected for initiatives that haven't started.

5. Change status, role or progress

These three settings sit on the first line of the initiative, the one starting with <article. Change only the word between the quotes.

Example: standby at 0% → active at 25%
Before:  <article data-status="standby" data-role="encourage" data-progress="0">
After:   <article data-status="active" data-role="encourage" data-progress="25">

When an initiative is finished, set data-status="achieved" and usually data-progress="100".

Changing these settings doesn't change any dates. To show that something changed, add an update note dated today.

6. Add, move or remove an initiative

Initiatives appear in the same order as their blocks, and they're numbered automatically. To change the order, you only ever move blocks.

Add

  1. Copy the blank initiative below. (The same template is at the bottom of the cheat sheet in the Content block.)
  2. Paste it where it should appear: right after the </article> line of the initiative that should come before it.
  3. Fill in the name, description and settings.
Blank initiative
    <article data-status="standby" data-role="encourage" data-progress="0">
      <div data-summary>Short Name</div>
      <div data-initiative>Full description of the initiative.</div>
      <div data-contact></div>
    </article>

Descriptions with a bulleted list

Airport Mobility (2a) and Arts & Culture (3b) use this layout. Copy one of them and change the words:

Description with bullets
      <div data-initiative>
        <p>Intro sentence:</p>
        <ul>
          <li>First point</li>
          <li>Second point</li>
        </ul>
      </div>

Move (example: make 4h the new 3e)

  1. Find Tourism Innovation Summit (today's 4h). Select its whole block, from <article down to </article>, and cut it.
  2. Find Signature Events (3d), the initiative that should come right before it.
  3. Paste on a new line right after Signature Events' </article> line.
  4. Save and preview. That's all: the numbers update themselves.
Before
  1. 3dSignature Events
  2. 3eSports Facilities
  3. 3fCulinary Growth
  4. ……
  5. 4hTourism Innovation Summit
After (automatic)
  1. 3dSignature Events
  2. 3eTourism Innovation Summit
  3. 3fSports Facilities
  4. 3gCulinary Growth
  5. …and so on, to 3l

The initiative keeps its settings, contact and update notes, because they're all inside the block you moved.

Remove

Delete the whole block, from <article down to </article>. The numbers after it close the gap automatically.

7. Add a section

Sections are the colored bars (Convention Center District, Transportation & Mobility, and so on). To add one, copy an existing section from its <section line down to its </section> line, paste it after another section's </section>, then change these two settings:

Section settings
<section data-theme="Title Of The Section" data-color="#1D737D">

data-color is the bar color as a six-character color code. The current sections use #1D737D (teal), #062E8B (navy), #3A068C (purple) and #691140 (burgundy).

Sections are numbered by their order too, so moving a whole section renumbers its initiatives (for example, 3a becomes 2a).

8. Check your work

Save, then open the page preview. If something is misspelled or missing, the dashboard shows a yellow notice on that exact row, saying what's wrong and how to fix it. For example:

Check this initiative: data-status="actve" is not an option (use: achieved, active, monitoring, standby)
Check this initiative: data-update="next week" is not a date (write it like June 1, 2026, or TBD)
Check this initiative: delete "3e)" from the summary. Numbers are added automatically from the order (this one is 3f)
Check this initiative: its closing </article> tag seems to be missing (the next initiative was inside it)
Check this section: data-color="bluish" is not a color (use a code like #1D737D)

Fix what the notice says, save, and preview again. When no yellow notices are left, you're ready to publish.

The yellow notices only appear in preview. The public never sees them. To check the live page, add ?dvcheck to the end of its address.

Quick checklist

  1. No yellow notices in preview.
  2. Your change shows up where you expected, with the number you expected.
  3. Click the date of anything you updated: the panel should open with your new note.
  4. Try one filter (for example, Status → Active) to make sure your initiative appears.

9. Troubleshooting

The whole dashboard looks like plain, unstyled text

The Dashboard engine block is missing or was changed. Make sure it's still on the page, unchanged. If it was edited, ask the web team to restore it.

An initiative disappeared

First, click Clear filters in case a filter is hiding it. If it's still missing, look in the Content block for a </article> or </section> that was deleted by accident, or paste back the copy you saved before editing.

The numbers changed after I added, moved or removed something

That's expected. Numbers always follow the order on the page, so everything after your change shifts to stay in sequence.

Last Updated still shows the old date

Check that the new note's date is written in quotes, like data-update="June 1, 2026", and that the note sits inside the right initiative, above its </article> line.

A contact shows a dash (—)

That's expected when the data-contact line is empty. Type the name between <div data-contact> and </div>.

I want to add a new status or role option

That needs a small change in the Dashboard engine block. Ask the web team.

For the web team: the engine block reads the Content markup and builds the dashboard, including the numbering. The status and role options, filter labels and role help text are defined at the top of its script.